SH269 Mechanical Grease Worker(for cone penetration)

Mechanical Grease Worker is according to the standards of GB/T 269 and ASTM D217. 

Working device: installed on the base at both sides of the reducer and driven by the motor and eccentric mechanism. Work continuously with 60 times per minute. Technical Parameters：

1) The motor is horizontal single capacitor starting motor.

   Working Power：AC 220V

    Power：370W

   Rolling Rate：1400r/min

2) Turbo reducer: A two-way output shaft reducer, transmission ratio is 25:1. At both ends of the turbine shaft reducer installed a pair of eccentric mechanism.

3) Movement：60times/min

4) Maximum number of movements：100000

5) Thermometer：Double metal thermometer，Range 0～50℃，Temperature index 0.5℃